Dynamic changes of histone H3 lysine 9 following trimethylation in bovine oocytes and pre-implantation embryos

Objectives

We have examined dynamic changes of histone H3 lysine 9 following trimethylation (H3K9me3), the mRNA expression levels of SUV39H1 and SUV39H2 in bovine oocytes and the role in the development of in vitro fertilization (IVF) pre-implantation embryos.

Results

There were strong H3K9me3 signals in germinal vesicle (GV) oocytes but no signals in MII oocytes. H3K9me3 signals were maintained during IVF pre-implantation embryo development. SUV39H1 and SUV39H2 showed significantly higher mRNA expression levels in GV oocytes than MII oocytes (P < 0.01). SUV39H1 showed high mRNA expression level in two-cell embryos, however, SUV39H2 showed high mRNA expression level in four-cell embryos. In other development stage, SUV39H1 and SUV39H2 showed low expression levels.

Conclusion

Bovine IVF pre-implantation embryos maintain strong H3K9me3 signals and SUV39H1 and SUV39H2 are highly expressed at the early development stage of pre-implantation embryos.

     

A constitutive expression system for <Emphasis Type="Italic">Pichia pastoris</Emphasis> based on the <Emphasis Type="Italic">PGK1</Emphasis> promoter

Objectives

To develop a new vector for constitutive expression in Pichia pastoris based on the endogenous glycolytic PGK1 promoter.

Results

P. pastoris plasmids bearing at least 415 bp of PGK1 promoter sequences can be used to drive plasmid integration by addition at this locus without affecting cell growth. Based on this result, a new P. pastoris integrative vector, pPICK2, was constructed bearing some features that facilitate protein production in this yeast: a ~620 bp PGK1 promoter fragment with three options of restriction sites for plasmid linearization prior to yeast transformation: a codon-optimized α-factor secretion signal, a new polylinker, and the kan marker for vector propagation in bacteria and selection of yeast transformants.

Conclusions

A new constitutive vector for P. pastoris represents an alternative platform for recombinant protein production and metabolic engineering purposes.

     

Concentrated polymer brushes do not induce the expression of inflammatory and angiogeneic genes in human umbilical vein endothelial cells

Objective

When polymer brushes are applied as the inner coating for artificial blood vessels, they may induce unwanted responses in vascular endothelial cells continuously exposed to the polymer surface. Accordingly, we have examined the in vitro effect of non-biofouling concentrated polymer brushes (CPBs) on pro-inflammatory and angiogenic responses of human umbilical vein endothelial cells (HUVECs).

Results

Micro-patterned CPBs were prepared on silicon wafers using biocompatible polymers, poly(poly(ethylene glycol)methyl ether methacrylate) (PPEGMA) and poly(2-hydroxyethyl methacrylate) (PHEMA). HUVECs were cultured on PPEGMA-CPBs and PHEMA-CPBs with different channel widths (20, 50, and 80 µm) and analyzed for mRNA expression of the pro-inflammatory cytokines IL-6 and IL-8 and angiogeneic vascular endothelial growth factor (VEGF). Irrespective of channel width, PHEMA-CPBs reduced the expression of all target genes, whereas PPEGMA-CPBs reduced VEGF and did not affect IL-6 and IL-8 levels.

Conclusion

Micro-patterned CPBs, irrespective of chemical structure or adhesion area, do not induce the expression of important pro-inflammatory and angiogenic mediators in endothelial cells.

     

Biofuels and bio-based chemicals from lignocellulose: metabolic engineering strategies in strain development

Interest in developing a sustainable technology for fuels and chemicals has unleashed tremendous creativity in metabolic engineering for strain development over the last few years. This is driven by the exceptionally recalcitrant substrate, lignocellulose, and the necessity to keep the costs down for commodity products. Traditional methods of gene expression and evolutionary engineering are more effectively used with the help of synthetic biology and -omics techniques. Compared to the last biomass research peak during the 1980s oil crisis, a more diverse range of microorganisms are being engineered for a greater variety of products, reflecting the broad applicability and effectiveness of today’s gene technology. We review here several prominent and successful metabolic engineering strategies with emphasis on the following four areas: xylose catabolism, inhibitor tolerance, synthetic microbial consortium, and cellulosic oligomer assimilation.     

PLA nanovectors with encapsulated betulin: plant leaf extract-synthesized nanovectors are more efficacious than PVA-synthesized nanovectors

Objectives

Betulin (BT) is an abundant triterpene found predominantly in the bark of Himalayan birch. It is difficult to deliver it in vivo because of its low aqueous solubility. We have therefore developed novel formulations of BT for improving its solubility, bioavailability and therapeutic efficacy.

Results

Poly-d,l-lactide nanovectors (PLA NVs) were synthesized using poly(vinyl alcohol) and Lonicera japonica leaf extract (LE) as a stabiliser and named as PLA-1 NVs and PLA-2 NVs. PLA-1 NVs and PLA-2 NVs were used for the encapsulation of betulin (BT) and named as BT-En-1 and BT-En-2 NVs. The encapsulation efficiency of BT-En-1 and BT-En-2 NVs were 99.3 and 100 % respectively. Prepared nanoformulations were physically stable. An in vitro study revealed 45 % BT was released over 24 h. BT had a prolonged release from BT-En-2 NVs as compared to BT-En-1 NVs. BT-En-2 NVs had better anticancerous activity against SiHa cells than BT-En-1 NVs.

Conclusions

Developed BT-EN-2 NVs had better biocompatibility, excellent stability and enhanced release characteristics than BT-En-1 NVs.

     

A cold-adapted and glucose-stimulated type II α-glucosidase from a deep-sea bacterium <Emphasis Type="Italic">Pseudoalteromonas</Emphasis> sp. K8

Objectives

To express and characterize a putative α-glucosidase, Pagl, from Pseudoalteromonas sp. K8 obtained via genome mining approach.

Results

Pagl was expressed and purified to homogeneity, with a molecular mass of 60 kDa. It was optimally active at pH 8.5 and 30 °C, and showed cold-adapted activity. Pagl exhibited specific activity towards substrates with α-1,4-linkage, with the highest specific activity of 19.4 U/mg for maltose, followed by pNPαG and maltodextrins, suggesting that Pagl belongs to the type II α-glucosidase. Interestingly, the activity of Pagl is significantly enhanced (2.7 times) in the presence of 200 mM glucose.

Conclusion

The unique catalytic properties of Pagl make it an attractive candidate for several industrial applications.

     

Endoglucanase enzymatic modification of kraft pulp during recycling

Objective

To investigate the cellulose modification process on kraft pulp during recycling by mono-endoglucanase.

Results

Pichia pastoris expressing endoglucanase, EG1, was grown in a 10 l fermenter yielding a high carboxymethyl cellulase (CMCase) activity of 340 U mg^?1. EG1-mediated modification of kraft pulp resulted in a paper sheet with the tensile index and burst index increased by 10 and 6.5 %, respectively. The kink index (indicating abrupt bends in fibres) of the enzyme-treated group decreased sharply by 45 % after the first recycling, compared with a reduction of only 1 % in the control group. Furthermore, EG1 treatment decreased the growth of crystallinity from 73.5 to 73.2 % and crystal size from 7.45 to 7.21 nm, which alleviated paper aging.

Conclusion

Endoglucanase EG1 modifies the interfacial properties of fibers, which affects fibre morphology during the recycling process and improves the technical properties of the resulting pulp and paper.

     

Identification and characterization of a novel bifunctional Δ<Superscript>12</Superscript>/Δ<Superscript>15</Superscript>-fatty acid desaturase gene from <Emphasis Type="Italic">Rhodosporidium kratochvilovae</Emphasis>

Objectives

To elucidate the biosynthesis pathway of linoleic acid and α-linolenic acid in Rhodosporidium kratochvilovae YM25235 and investigate the correlation of polyunsaturated fatty acids with its cold adaptation.

Results

A 1341 bp cDNA sequence, designated as RKD12, putatively encoding a Δ¹²-desaturase was isolated from YM25235. Sequence analysis indicated that this sequence comprised a complete ORF encoding 446 amino acids of 50.6 kDa. The encoded amino acid sequence shared higher similarity to known fungal Δ¹²-desaturases that are characteristic of three conserved histidine-rich motifs. RKD12 was further transformed into Saccharomyces cerevisiae INVScl for functional characterization. Fatty acid analysis showed the yeast transformants accumulated two new fatty acids: linoleic acid and α-linolenic acid. Furthermore, mRNA expression level of RKD12 and the content of linoleic acid and α-linolenic acid were increased significantly with the culture temperature downshift from 30 to 15 °C, which might be helpful for the cold adaptation of YM25235.

Conclusion

RKD12 is a novel bifunctional ?¹²/?¹⁵-desaturase gene, and the increased RKD12 mRNA expression level and PUFAs content at low temperature might be helpful for the cold adaptation of YM25235.